Get a Free Inspection
Thank You!
We'll get back to you shortly. For immediate help, call (832) 990-0566.
Metal Roofing Pasadena TX is a metal-led, full-service roofing company working Pasadena and the east Harris County communities around it. Our focus is metal: standing seam, stone-coated steel, and the exposed-fastener panels that hold up so well on the Gulf Coast. But most homes here are shingled, so we run the full menu alongside it: roof replacement and repair, storm and wind damage, insurance claim help, commercial systems, and new installation. Whether your roof sprang a leak last night or you are pricing a metal roof you plan to keep for decades, we inspect it first, put the scope in writing, and give you a firm number before any work starts.
Pasadena sits in a part of the upper Gulf Coast with a history worth knowing before you reroof. Decades of groundwater pumping pulled the land surface down across the Houston-Galveston area, and a lot of the housing stock went up while it was happening, so plenty of older decks here no longer sit perfectly flat. That matters most with metal, because a long panel is a straightedge that shows every dip. Add the wind and wind-driven rain that come off the Gulf, and a roof in this area works harder than the brochure assumes. We measure the deck plane, size the system for local conditions, and build it to handle the weather Pasadena actually gets, not a generic install.
If your roof is showing any of these, we will tell you why, and whether it is a repair or a replacement.
A brown ring on the ceiling or a drip during a Gulf downpour means water is already past the roof covering. On a settled east Harris County deck it often runs sideways along a rafter before it shows, so the stain is rarely right under the real entry point. The sooner we trace it, the smaller the repair.
Tabs torn off the gulf-facing slope, corners curling, or shingles lifting in the wind are the covering telling you its seal has failed. Once that seal breaks, the next storm peels more, and bare spots let water into the decking. Caught early, it is usually a targeted repair.
Pasadena takes its roof damage mostly from wind and wind-driven rain, not the heavy hail of North Texas. Lifted ridge caps, creased shingles, bent flashing, or debris strikes all deserve a look after a storm, even when the roof seems fine from the driveway. We document what we find for you, and for a claim when it applies.
If your roof reads wavy from the street, the framing underneath has usually settled unevenly, a common story in the Houston-Galveston area where the ground dropped over the last century. It is normally a roofing issue to correct, not a structural emergency, but it changes how the next roof should be built, especially a long metal panel. We measure the deck plane before we recommend anything.
Piles of sand-like granules at the downspout are the asphalt wearing off your shingles, the layer that shields them from the Gulf Coast sun. Heavy granule loss means the roof is near the end of its service life. On a hot, south-facing Pasadena roof it tends to show up sooner than the warranty suggests.
A roof that soaks up heat pushes it straight into your attic, and your air conditioner pays for it all summer. A dark, aging shingle roof runs hotter than a reflective metal or cool-roof system sized for this climate. If your bills keep climbing, the roof is often part of the reason.
Metal-led and full-service: from standing seam installs to storm, insurance and commercial work across east Harris County.
Metal is what we do most, and on the Gulf Coast it earns its keep: standing seam and stone-coated steel shed wind-driven rain, resist uplift when they are fastened right, and shrug off the sun that cooks a shingle roof. We install standing seam with concealed clips that let the panel move as it heats and cools, stone-coated steel for homes that want the look of shingle or tile with the strength of metal, and exposed-fastener panels like R-panel and 5V where the budget or the building calls for it. Every profile goes over the right underlayment and, where the deck has settled, only after the plane is corrected.
A metal roof is a long-term decision, so we walk you through the trade-offs honestly: profile, gauge, finish, and color, and what each one means for cost and lifespan in this climate. We size and detail the system for Pasadena wind and heat, not for a catalog, and we do not start cutting panel until the deck is ready to carry it straight. Done right, it is the last roof many homes here will need for decades.
When a roof is past repair, a replacement in Pasadena starts on the deck, not in the material aisle. We pull the old covering, inspect the decking and flashing, and check whether the plane has dropped anywhere before we lay anything new, because covering a dished deck just hides the problem. You get a written scope with the material, the underlayment, and any decking or flashing work spelled out before the first panel or shingle goes down.
We replace in metal or shingle, whichever fits the home and the budget, and we are straight about which makes sense for how long you plan to stay. A reflective metal roof costs more up front and lasts far longer; a quality architectural shingle roof costs less and still performs well here when it is installed correctly. Either way, the old roof leaves in our trucks and the new one is detailed for Gulf Coast weather.
Most roof trouble in east Harris County starts with wind rather than age: a boot split at a pipe, a lifted ridge cap, flashing backed out at a wall, or tabs gone off the slope that faces the Gulf. We find where the water actually enters, which on a settled deck is often feet away from the stain on your ceiling, and fix the cause instead of smearing sealant over the symptom. Most repairs are handled quickly once we have eyes on the roof.
Before we touch anything you get a firm price and an honest call on repair versus replace. If the roof has years left and one detail failed, a repair is the right money. If it is near the end and leaking in more than one place, we will tell you that too, and give you the replacement number so you can decide without pressure.
The upper Gulf Coast is a wind market. Tropical systems, squall lines, and straight-line gusts do most of the roof damage here, creasing shingles, lifting ridge and hip caps, bending flashing, and driving rain under the covering, while hail shows up far less often than it does in North Texas. After a storm we inspect the whole roof, not just the obvious spot, because wind damage is easy to miss from the ground and gets worse with the next system.
We photograph and document everything we find, dry in anything that is open, and lay out the repair in writing. When the damage is a covered loss we can walk you through the claim with that same documentation, and when it is normal wear we will tell you plainly rather than talk you into a claim that goes nowhere.
A roof claim on the Gulf Coast has a wrinkle most of the country does not share: a deck that settled over decades is wear, not storm damage, and an adjuster can fairly call it that. Our job is to separate the two on paper, with dated photos and a clear scope, so the storm damage gets counted and the old settlement does not sink your claim. We work the inspection and documentation so you are not trying to argue roofing with an adjuster on your own.
We are not a public adjuster and we do not promise a payout, but we do give you an honest, documented report of what the storm actually did. That report is what a fair claim is built on, and it keeps you from paying a deductible on a condition no carrier was ever going to cover.
The Ship Channel corridor runs on flat and low-slope roofs: warehouses, process-adjacent steel-deck buildings, strip centers, offices, and churches across east Harris County. We install and maintain single-ply membrane and standing seam metal on commercial buildings, starting with a roof plan and the real deck condition rather than a walk-around guess. Work is phased around your operations so the building stays watertight at the end of every day.
Commercial roofs fail at the details, so we price the flashing, curbs, drains, and penetrations as part of the scope instead of discovering them later. Whether it is a new membrane, a metal re-roof, or a maintenance program that catches small problems before they flood a tenant, you get a written plan and a budget you can actually plan around.
A quick primer so you know what the choices mean before you spend on a new roof.
The honest difference is lifespan versus up-front cost. A quality asphalt shingle roof is the affordable choice and still performs well across Pasadena when it is installed right, but the Gulf Coast sun and heat age it faster than the box promises, and you can expect to replace it once or twice over the years you own the home. A metal roof costs more to install, yet a standing seam or stone-coated steel system routinely lasts decades, reflects heat instead of soaking it up, and handles wind better once it is fastened and detailed correctly. If you plan to stay a long time, metal usually wins on total cost; if you need the lowest number today, a good shingle roof is a sound call. We quote both so the choice is yours.
Not all metal roofs are built the same way, and the fastening is the main difference. Standing seam hides its fasteners under raised, interlocking seams, so there are no screw holes exposed to the weather and the panels can expand and contract freely in the heat; it is the premium, longest-lasting metal option. Exposed-fastener panels like R-panel and 5V crimp screw down through the face of the metal, which costs less and installs faster, and they are a workhorse on barns, shops, and plenty of homes, but the rubber washers under those screws are the detail to maintain over time. We help you match the profile to the building, the slope, and how long you want to go between any upkeep.
We run the full roofing menu for Pasadena, with by far the deepest bench in metal. That means we can put the right material on your home instead of the one a crew happens to specialize in, and we will tell you honestly where each one fits on an east Harris County roof.
The flagship metal roof: concealed-fastener panels with raised seams that lock together, no exposed screws, and the longest service life of anything we install. It handles Gulf wind and heat beautifully and looks clean on a modern or traditional home. On a settled deck we correct the plane first, because a long standing seam panel will show every dip.
For homeowners who want metal without the modern panel look, stone-coated steel gives you the profile of shingle, shake, or tile with the strength and lifespan of steel. We also install exposed-fastener options: R-panel and corrugated for value and commercial work, 5V crimp for a classic look, and copper where a home calls for a premium, architectural finish that ages into its own patina.
Shingle is still the volume roof in Pasadena, and a quality architectural shingle installed correctly performs well here for years at a price most budgets can handle. We install it with proper underlayment and detailing for the Gulf Coast, and on the shallow rooflines common around here we make sure the slope is shingle-appropriate before we start.
Concrete and clay tile is beautiful but heavy, so we check that the framing can carry the dead load before we ever recommend it, and we will say no when a home cannot. For low-slope and commercial roofs, which are everywhere along the Ship Channel, we install single-ply TPO membrane and modified bitumen, the right systems where a sloped covering does not belong.
Not sure what belongs on your roof? That is what the free inspection is for. We look at the deck, the slope, and how long you plan to stay, then lay out the material options in writing so you can choose with the real numbers in front of you.
From the first inspection to the final walkthrough, here is how we work.
We start on the roof and in the attic, not from the driveway. We check the covering, the flashing, the decking, and the deck plane, and on storm calls we document everything we find, so the plan is based on your actual roof.
You get a clear, itemized scope with the material, underlayment, and any decking or flashing work spelled out, and a firm price before anything starts. No vague "we'll see when we open it up," and no pressure to sign on the spot.
We walk you through the options that fit your home and budget: metal profile and gauge or shingle line, finish, and color, with samples so you can see them in the Gulf Coast light. You choose with the trade-offs laid out, not guessed.
We handle the City of Pasadena roofing permit, correct the deck plane where it has settled, and install the system to spec, drying in each day so nothing sits open under a Gulf sky. Your property is protected and cleaned up as we go.
We walk the finished roof with you and hand over photos of the work, the permit record, and the workmanship warranty in writing. If a detail bothers you on that walk, it gets fixed before the job is closed out.
Metal specialists, straight on price, and built for Gulf Coast roofs.
Metal is our core work, not a line we added to a shingle business. We install standing seam, stone-coated steel, and exposed-fastener profiles correctly, with the clips, underlayment, and detailing a metal roof actually needs on the Gulf Coast.
You see a firm, itemized price before anything starts, and you approve it first. The decking, flashing, and any plane correction are line items in the scope, not surprises discovered on the second morning.
Texas does not license roofers, so the things that actually protect you are the permit and real insurance. Work is permitted with the City of Pasadena and backed by liability and workers' comp coverage, with a workmanship warranty in writing.
We know these roofs: the settled decks, the shallow postwar rooflines, the wind off the Gulf, and the flat roofs along the Ship Channel. We build for what Pasadena actually throws at a roof, not a generic spec.
Roofing is priced by the roof, not by a chart, but here are honest ranges to plan around. Your exact number comes after a free inspection, and the estimate is always free.
A targeted repair: flashing, a pipe boot, a lifted ridge cap, or a wind-damaged section. Most repairs land here.
A full architectural shingle reroof, by roof size, pitch, and whether the old roof needs a tear-off.
Standing seam or stone-coated steel, by size, profile, gauge, and finish. More up front, far longer life.
What moves the price: the material and profile, the roof's size and pitch, how many layers come off in the tear-off, the condition of the decking and flashing, and any deck-plane correction on a settled roof.
These are planning ranges, not a quote. Your firm price comes after an on-site inspection, and the estimate is always free.
Straight answers from roofs we inspect across east Harris County.
For most homeowners planning to stay more than a few years, yes. A standing seam or stone-coated steel roof reflects the Gulf Coast heat, handles wind better than shingle, and routinely lasts decades, so you avoid the repeat replacements a shingle roof needs in this climate. It costs more up front, so the honest answer depends on how long you will own the home. We quote metal and shingle side by side so you can decide on the real numbers.
Most residential metal roofs here run from about $15,000 to $40,000 or more, driven by the roof's size and pitch, the profile and gauge you choose, and the finish. Standing seam sits at the higher end; exposed-fastener panels like R-panel cost less. A shingle reroof is cheaper up front. You get a firm price after a free inspection, never a number over the phone.
Almost always because the framing underneath has settled unevenly. Pasadena sits in the Houston-Galveston area, where decades of groundwater pumping pulled the land surface down over the last century, and a lot of homes were framed while it was happening. It is usually a roofing problem to correct rather than a structural emergency, but it changes how the next roof should be built, especially a long metal panel that shows every dip.
Yes. A roof replacement in Pasadena is permitted through the City of Pasadena, and the work is inspected against that permit. We handle the permit as part of the job and give you the record at closeout, so you are not left chasing paperwork.
Mostly wind. Unlike North Texas and the Panhandle, the upper Gulf Coast does not get the frequent heavy hail that drives the roofing trade there. Here the damage comes from wind, wind-driven rain, and tropical systems, so we inspect and build with uplift and water intrusion in mind, and we will tell you honestly when a roof is wind-damaged versus simply worn.
Often, when the damage is a covered storm loss. The catch on the Gulf Coast is that a deck that settled over decades is wear, not storm damage, and a policy will not cover that. We document what the storm actually did with dated photos and a clear scope, so the covered damage is counted and you are not paying a deductible on a condition no carrier was going to fund. We are not a public adjuster, but that documentation is what a fair claim is built on.
A properly installed metal roof commonly lasts far longer than asphalt shingle, often several decades, even in Pasadena's heat and salt-tinged Gulf air. Standing seam, with its concealed fasteners and room to move as it heats and cools, tends to go the longest. Exposed-fastener panels also last a long time, with the screw washers being the detail to check over the years.
Sometimes, but only after we look. A metal roof can go over one layer of shingles on the right structure, which saves on tear-off, but on a settled or damaged deck it is better to strip down, correct the plane, and start clean so the panels lie straight and last. We tell you which applies to your roof after the inspection, not before.
From Pasadena neighborhoods out through the Ship Channel corridor and east Harris County.